SF 40 H-S-W

all-glass system

This transparent all-glass system without vertical profiles on panel edges, consists of individual non-connected sliding panels. This makes it particularly safe to operate and virtually maintenance-free.

Profile system

  • All-glass horizontal sliding door system
  • Suspended design made of individually sliding leaves
  • Opens to the inside, outside or pivoting
  • Optionally to open by sliding to one side or to both sides
  • Optionally with revolving blind frame
  • Height adjustment after installation possible

Hardware

  • All fittings hidden within the profiles
  • Low-maintenance, non-corroding and failsafe hardware components
  • Elements are locked via a floor bolt
  • An integrated pass door panel with a lever-operated multiple locking system, lock and profile cylinder can be provided

Runner system

  • Each element is hung from two runner assemblies that slide in a ceiling-mounted aluminum track
  • Low-noise, hard-wearing, heat and cold resistant running rollers
  • Runner assemblies can cross any angle between 90° and 180°

Sealing and ventilation

  • Vertical gap between leaves approximately 1/8” (3 mm)
  • Flexible gap sealing profiles can be fitted to seal gap
  • Horizontal upper and lower brush seals are fitted on the inner and outer sides
  • Lower and upper brush seal attached to panel frame and not to guide tracks

Glazing

  • Single pane safety glass of 5/16”, 3/8” and 15/32” (8, 10 or 12 mm) thickness may be fitted
  • Panes are secured by means of a concealed screw-fixing system in top and bottom door leaf profiles
  • Glazing can be replaced subsequently without difficulty
  • Leaves can be replaced subsequently without difficulty