Horizontal Sliding Wall SF 40 H-S-W

  • Optional separate pass door available, as a single door or French-style doors
  • Different kinds of locks and handles available
  • Mushroom-head lock for optimal tightness and increased burglar resistance

System Information

  • All-glass horizontal sliding door system
  • Suspended design made of individually sliding leaves
  • Opens to the inside, outside or pivoting
  • Optionally to open by sliding to one side or to both sides
  • Optionally with revolving blind frame
  • Height adjustment after installation possible
  • All fittings hidden within the profiles
  • Low-maintenance, non-corroding and failsafe hardware components
  • Elements are locked via a floor bolt
  • An integrated pass door panel with a lever-operated multiple locking system, lock and profile cylinder can be provided
  • Each element is hung from two runner assemblies that slide in a ceiling-mounted aluminum track
  • Low-noise, hard-wearing, heat and cold resistant running rollers
  • Runner assemblies can cross any angle between 90° and 180°
  • Vertical gap between leaves approximately 1/8” (3 mm)
  • Flexible gap sealing profiles can be fitted to seal gap
  • Horizontal upper and lower brush seals are fitted on the inner and outer sides
  • Lower and upper brush seal attached to panel frame and not to guide tracks
  • Single pane safety glass of 5/16”, 3/8” and 1/2” (8, 10 or 12 mm) thickness may be fitted
  • Panes are secured by means of a concealed screw-fixing system in top and bottom door leaf profiles
  • Glazing can be replaced subsequently without difficulty
  • Leaves can be replaced subsequently without difficulty

You can choose from a range of standard colours - and many, many more from the SUNFLEX colour wheel.

Our 5 standard colours are:

  • RAL 9016
  • RAL 7016
  • RAL 9006
  • RAL 9007
  • E6EV1