Horizontal Sliding Wall SF 55 H-S-W

  • Optional separate pass door available, as a single door or French-style doors
  • Different kinds of locks and handles available
  • Mushroom-head lock for optimal tightness and increased burglar resistance

System Information

  • Horizontal sliding partition in thermally insulated aluminum profiles
  • Suspended design made up of individually sliding leaves
  • Rear-ventilated wooden cladding inside (SF55c) (optional)
  • The construction profile depth: 2 3/16” (55 mm) (SF55c = 2 15/16” (75 mm))
  • Opens to the inside, outside or pivoting
  • Opens by sliding to one side or both sides
  • Optionally with frame profiles on all sides
  • Height adjustment after installation possible
  • All fittings hidden within profiles
  • Low-maintenance, non-corroding and failsafe hardware components
  • Leaf locking takes place via rods that engage approximately 22 mm in the floor
  • Locking and unlocking of leaves via actuating levers with anti-intruder catches
  • Leaves can additionally be fitted with profile cylinder locks
  • Design allows for a separately operated pass door panel with lever-operated multiple locking system, lock and profile cylinder
  • Each element is hung from two runner assemblies that slide in a ceiling-mounted aluminum track
  • Low-noise, hard-wearing, heat and cold resistant running rollers
  • Runner assemblies can cross any angle between 90° and 180°
  • In the vertical panel joint rain and wind proofing ensured by EPDM seals at two sealing levels
  • Double brush seals with a flexible plastic base are fitted horizontally at bottom
  • Glazing configuration of 5/16” to 1 1/2” (8 mm to 36 mm) possible
  • Glazing can be replaced subsequently without difficulty
  • Leaves can be replaced subsequently without difficulty

You can choose from a range of standard colours - and many, many more from the SUNFLEX colour wheel.

Our 5 standard colours are:

  • RAL 9016
  • RAL 7016
  • RAL 9006
  • RAL 9007
  • E6EV1