MenuClose

Glazed Folding Door SF 55c

  • Different kinds of locks available
  • Mushroom-head lock for optimal tightness and increased burglar resistance
  • Panel catcher for additional security to fix the pass door to the adjacent panel
  • Burglar-resistant fittings
  • Proper Sunflex handle series
  • Optional twin-lock-mechanism for additional burglar resistance
  • Later height adjustment of the running mechanisms possible – e.g. in case of subsidence
  • Assembly shoes allow a fast assembly and precise adjustment of the vertical frame profiles
  • Optional security package for maximum burglar resistance up to resistance class 2

System Information

  • Glass folding partition in thermally insulated aluminum profiles.
  • Bottom-supported construction
  • Rear-ventilated wooden cladding inside (SF55c) (optional)
  • Construction profile depth: 2 3/16” (55 mm) (SF55c = 2 30/32” (75 mm))
  • Recessed or surface-mounted floor track (optional)
  • Opens to inside or outside
  • Opens by sliding to one side or both sides
  • Roller track and guide tracks are flush to system faces
  • Design allows for height differences and expansion
  • UW up to 1,5 W/m2k (with glazing Ug = 0,7 W/m2k)
  • Air permeability class 4 to EN 12207 (Test Certificates for air permeability)
  • Rain proofing class E900 to EN 12208 / Typ A (Test Certificates for water tightness)
  • Rain proofing class 9A to EN 12208 / Typ I (Test Certificates for water tightness)
  • Resistance to wind load class B4 to EN 12210 / Typ A (Test Certificates for resistance to wind load)
  • Resistance to wind load class A4 to EN 12210 / Typ I (Test Certificates for resistance to wind load
  • Sound insulation value (Rw or weighted sound reduction) = STC 36 dB according
  • Burglar-proof to resistance class 2 (WK2)
  • All fittings hidden within profiles
  • Low-maintenance, non-corroding and failsafe hardware components
  • Leaves lock via rods that engage in floor and ceiling tracks and/or via sliding doors that engage in the frames or with the neighboring leaves
  • Locking and unlocking via actuating levers with anti-intruder catches
  • Optionally fitted with different lock types
  • Hinges feature pivot pins that cannot be knocked out (anti-intruder feature)
  • The door can be securely clamped to the adjacent leaf using snap latches
  • Simplified adjusting due to height-adjustable runner assembly system
  • Runner assemblies are situated above water drainage collection area
  • Low-noise, hard-wearing, heat and cold resistant running rollers
  • Rain and wind proofing ensured by EPDM seals at two sealing levels
  • A glazing configuration of 5/16” to 1 1/2” (8 mm to 38 mm) possible
  • Glazing can be replaced subsequently without difficulty

Downloads