Glazed Folding Door SF 75c

  • Different kinds of locks available
  • Mushroom-head lock for optimal tightness and increased burglar resistance
  • Panel catcher for additional security to fix the pass door to the adjacent panel
  • Burglar-resistant fittings
  • Proper Sunflex handle series
  • Optional twin-lock-mechanism for additional burglar resistance
  • Later height adjustment of the running mechanisms possible – e.g. in case of subsidence
  • Assembly shoes allow a fast assembly and precise adjustment of the vertical frame profiles
  • Optional security package for maximum burglar resistance up to resistance class 2

System Information

  • Glass folding partition in ultra-thermally insulated aluminum profiles
  • Bottom-supported construction
  • Rear-ventilated wooden cladding inside (SF75c) (optional)
  • The construction profile depth is 2 30/32” (75 mm) (SF75c = 3 45/64” (95 mm))
  • Recessed or surface-mounted floor track (optional)
  • Opens to inside or outside
  • Opens by sliding to one side or both sides
  • Roller track and guide tracks are flush to system faces
  • Design allows for height differences and expansion
  • UW up to 1,0 W/m2k (with glazing Ug = 0,5 W/m2k)
  • Air permeability class 4 according to EN 12207
  • Rain tightness class 9A according to EN 12208
  • Resistance to wind load class B5/C4 according to EN 12210
  • Airborne sound insulation value Rw = 36 dB according to DIN EN ISO 140-3
  • Burglar-resistance up to resistance class 2 (WK2)
  • All fittings hidden within profiles.
  • Low-maintenance, non-corroding and failsafe hardware components
  • Leaves are locked by rods that engage in the floor and ceiling tracks and/or via sliding doors that engage in the frames or with the neighboring leaves
  • Locking and unlocking via actuating levers with anti-intruder catches
  • Optionally fitted with different lock types
  • The hinges feature pivot pins that cannot be knocked out (anti-intruder feature)
  • The door leaf can be securely clamped to adjacent leaf using snap latches
  • Simple adjustment due to height-adjustable runner assembly system
  • Runner assemblies are situated above water drainage collection area
  • Low-noise, hard-wearing, heat and cold resistant running rollers
  • Rain and wind proofing ensured by EPDM seals at two sealing levels
  • Glazing configuration of 1 1/32” to 2 1/4" (28, 40, 48 mm and 56 mm) possible (SF75)
  • Glazing configuration of 1 1/2” to 1 3/4" (40 and 48 mm (SF75c)
  • Glazing can be replaced subsequently without difficulty